| 최대 범위: | 200A~1200A | 전압: | 5 |
|---|---|---|---|
| 감도: | G=2000/IP | 영 산출: | 2.5 |
| 현재 소비: | 13 | 부하 저항: | 10 |
| 짐 용량: | 1 | 출력 내부 저항: | 10 |
| 하이 라이트: | 5V Current Transducers,1200A Current Transducers |
||
product manual
NACA XXXM-S5/SP2VA series current sensors are suitable for accurate measurement of AC, DC, and pulse current isolation. The primary side and the secondary side are completely insulated during measurement.
| Performance requirements | ||||||
| parameter name | symbol | unit | parameter | condition | ||
| Minimum | Typical value | Max | ||||
| Electrical parameters | ||||||
| Maximum range | IPN1 | A | 200A~1200A | For more details, please contact CRRC | ||
| voltage | UC | V | 4.75 | 5 | 5.25 | |
| Operating temperature | TA | °C | -40 | 125 | ||
| Output voltage (analog) | Vout | V | Vout=(Uc/5)·(V0+G·Ip) | |||
| Sensitivity | G | mV/A | G=2000/IP | @UC=5V | ||
| Zero output | VO | V | 2.5 | |||
| Current consumption | IC | mA | 13 | 15 | @ UC=5V,No load on Vout | |
| Load Resistance | RL | KΩ | 10 | |||
| Load capacitance | CL | nF | 1 | 10 | ||
| Output internal resistance | ROUT | Ω | 10 | DC | ||
| Performance parameter | ||||||
| Sensitivity error | εG | % | ±1 | @TA=25℃,@UC=5V,IP≤900A | ||
| ±2.25 | @TA=25℃,@UC=5V,IP＞900A | |||||
| ±3.25 | @-40℃＜TA＜125℃,@UC=5V | |||||
| Electrical zero offset | FLY | mV | ±3 | |||
| Magnetic zero offset | FROM | mV | ±2 | |||
| Zero output error | Delete | % | ±0.5 | @TA=25℃,@UC=5V | ||
| ±0.9 | @-40℃＜TA＜125℃,@UC=5V | |||||
| Proportional error | .R | % | ±0.5 | |||
| Linearity error | εL | % | ±0.5 | Of full range | ||
| Response time | tr | μs | 4 | 7 | ||
| bandwidth | BW | kHz | 40 | @ -3dB | ||
| Phase difference | ∆φ | ° | -4 | @DC to 1kHz | ||
| Dimensions |
| Series size |
 |
| Mechanical parameters | Remarks |
| ● Plastic case PA 66 GF 25 ● Magnetic core FeSi wound core ● Mass 50g |
● ● VOUT>VO when IP flows in the positive direction (see arrow on drawing) |
Procurement information
1. Products can be customized according to your needs. You are welcome to provide physical samples or detailed process drawings to design, produce and process.
2. If there is no special requirement, our company will assign logistics distribution and deliver the goods to customer factory
3. Payment method: delivery after payment, which can be negotiated according to the specific order quantity.
4. The response time of the number of customers should not exceed 8 working hours.
5. Emergency on-site service time shall not exceed 24 hours.
6. Provide emergency support for customer's urgent shortage of spare parts.
담당자: Miss. Elaine
전화 번호: +86 18150151931
팩스: 86-592-2611505
